Control Valves

1. Direct Acting Solenoid Valve SS body:

Specifications:
  • Port Size:- 1”,1.5”,2”
  • Pressure:- 0.5 to 12 Bar
  • Body Material:- SS 304
  • 24V,48V,110V,220V,230V,240V(50Hz)
  • Power Consumption:- 6W,12W,17W
  • Operating Voltage:- DC: 12V,24V
  • Power Consumption:- 8W
  • Media:- Air,Water,Chemical,Gases,Oil,Diesel,Kerosene,LPG

                                                

2. Pilot Valves:
 
  • 2 way/3 way NC pilot operated
Specifications:
Port Size : 1/2?,3/4”,1”,1.5” BSP / NPT
Pressure : 0 bar to 10 bar
Body Material : Forged Brass
Media Temp: 10 °C to 90 °C
Operating Voltage : AC : 24V, 48V, 110V, 220V, 230V, 240V (50HZ)
Power Consumption : 5.5W, 7.5W, 8.5W, 9.5W, 12W, 22W
Operating Voltage : DC : 12V, 24V
Power Consumption : 10W, 11W
Media : Air ,Water , Chemical, Inert Gases, Oil, Diesel, Kerosene, LPG.
Note : USE OF FILTER IN THE INLET PORT IS RECOMMENDED
 
 
                                                     




  • 2 Way Semi Lift Diaphragm Operated Solenoid Valve (UMD) NC Type:
Specifications:
Port Size : 1? BSP / NPT
Pressure : 0 bar to 7 bar
Body Material : SS ASTM A351 Grade CF8 / CF8M
Media Temp: 10 °C to 90 °C
Operating Voltage : AC : 24V, 48V, 110V, 220V, 230V, 240V (50HZ)
Power Consumption : 5.5W, 7.5W, 8.5W, 9.5W, 12W, 22W
Operating Voltage : DC : 12V, 24V
Power Consumption : 10W, 11W
Media : Air ,Water , Chemical, Inert Gases, Oil, Diesel, Kerosene, LPG.
Note : USE OF FILTER IN THE INLET PORT IS RECOMMENDED
                                                          
                                                     



3. Pressure Reducing Valve:

The PRV Series Direct-Acting Pressure Regulators are pressure-reducing devices expressly designed for line pressure applications that demand accurate and reliable control, no matter what fluctuations occur in supply pressure or flow rate.
 
The regulator's rolling diaphragm provides total separation of the mechanism from the flow for long-lasting trouble-free service, as well as minimal flow resistance.
 
The PRV regulator comprises a SS body. The component that determines the downstream pressure is a spring that can be changed in the field.

Springs are available for a wide selection of downstream pressure settings and come in three models:
  • adjustable
  • fixed downstream preset pressure
  • drip-tight for static pressure
  • Sizes available : 1",1-1/2",2”
 

                                                             




4. Pressure Relief Valve:
these type of valves are preferred by clients for its durability and long lasting life.
 
Specifications:
  • Body               :  CF8 / CF8M / CF3M
  • Sprig Cover      :  CF8
  • Plug                :  CF8 / CF8M / CF3M
  • Sealing Spacer:   NBR
  • Plug Bolt         :   S.S.304
  • Diaphragm       :   NBR/Viton
  • V-Seal             :   NBR/Viton
  • Washer           :   Brass
  • Spring             :   Spring Steel
  • Adjusting Stem:   S.S.304
 

                                                           



5. Hydraulic Valve:
The 300 Series valves offer solutions to a broad range of applications through their versatile and accurate double-chambered diaphragm actuators. This special component enables smooth, no-slam closure in all water conditions and operation at very low pressures.
 
The 300 Series valves feature three operational modes: hydraulic or electric 'on/off' remote control, pressure-reducing or sustaining/relief, and a combination of these two individual features.
 
The valves also enable high flow with low head loss and may be installed in any position.
 
  • Sizes: 1-1/2", 2" or 3" in either "Y" or angle bodies
  • Pressure range: 0.7–10 bar - ISO: PN 10 (10-150 psi - ANSI: Class 125)
  • Working temperature: up to 80°C (176°F) - water
  • End connections: Female-threaded (NPT or BSPT) or flanged in all known standard
 
                                                       



Send Email/Sms Enquiry for Control Valves
 
   
   


X
This product has been added to your Cart. Your cart has item(s) now
Product ImageProduct DescriptionQuantityAmountTotal AmountRemove
Subtotal:() Items
Total Amount To Paid: